Proactive Technologies Report – October, 2024

Economic Development Opportunities – An Important Incentive in Attracting Companies to Your Region

by Dean Prigelmeier, President of Proactive Technologies, Inc.

When organizations try to create new jobs in their area – working with companies that are considering moving to, expanding to or expanding within their areas – skilled labor availability for many regional economic development strategies may include an offering that consists of one part skills assessment, one part general skill classes and a sprinkling of worker tax credits or grants. That seems to be what most incentive packages include, but is that because: A) that is what the other offers look like; b) it has been like that for decades; C) it is assumed that is all that is available; or D) all of the above?

For over forty years headlines sounded the alarm that those institutions that were training the workforce of tomorrow were not succeeding in their effort as discussed in, “An Anniversary That You Won’t Want to Celebrate: Years Later and The Skill Gap Grows – Is it Finally Time to Rethink The Nation’s Approach?“). Many skilled workers that are available to work do not have the skills that employers need today. Not completely satisfied with their answer to the inevitable question regarding the region’s skilled labor availability and how workers with specific skill needs will be found or developed, some economic development organizations are exploring other options and opportunities.

“Whether attracting new companies and helping them thrive and expand, or helping existing business to do the same, this approach is an important component of any economic development strategy.”

It is important to understand that the types of skills that employers are most concerned with – especially employer-specific task-based skills – most likely have not been in the local workforce, nor have any programs been available in local institutions to develop them, simply because these new jobs, with new skill requirements, have never been in the area. The types of skills needed for most modern manufacturing and advanced manufacturing have never been developed because the need was not present nor the data on these jobs available. Even if the need was present, by the time the skill is recognized, a program developed and a worker completed the learning, manufacturers either moved on or moved out.

Let’s face it, most organizations that successfully promote their region for economic development do so on the current low cost of labor, right-to-work status, low business and employment tax rates, economic incentives, availability of infrastructure and quality of life. They probably never needed a system in place to develop the skills necessary to attract modern and advanced manufacturing. Companies interested only in geographical, financial and aesthetic incentives have already moved. Other employers understand that if they want higher skilled workers, they need to expect to pay higher wages now or later when those skill levels are reached and competition for skilled labor kicks in. Read More


Increasing Worker Capacity – An Alternative to Cutting Workers for Short-term Cost Savings

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

In business, if you encounter market “softness” and believe that the business level that you were previously operating at is now unsustainable – even if for a limited period – you might be tempted to first cut time for training, then “cut labor costs” to extend short-term cash flow and/or make the balance sheet appear healthier for investors. It often becomes a slippery slope that can lead some organizations struggling to get off. Sometimes the pundits’ forecasts were inaccurate or the recovery is swifter than anticipated. Regardless, what appear as a benign short-term solution can have long-term repercussions as the market recovers and the employer is now struggling to regain the capacity the workers afforded, while watching opportunity slip by.

Sometimes investments are made in machinery and technology during the lulls to get ready for the economic up-turn, but too rarely is any effort made to determine the level of each worker’s current capacity (i.e. what percent of the tasks they were hired to “expertly” perform) relative to the job they are currently in and what could be done to increase it to handle not only existing technology and processes, but the new technology and processes as well. One might even think about cross-training workers to build “reserve capacity.”

Too often, in this age where every quarterly report has to be as good or better than the one before – actually earnings per share – even if the economy currently doesn’t allow it, well-run businesses are pressured to cut into the bone; driving down wages, cutting benefits and ultimately eliminating workers. Investment in worker training isn’t permitted. It doesn’t take an accounting genius to make sweeping, ill-informed cuts, but it does take a pretty savvy leader to recognize and avoid the perilous track or, worse yet, pick up the pieces after these mistakes have been made.

“That is the one point missed in all of the cuts to wages, benefits and staff; the first wave affects those who have no choice, the second wave affects the company as those with choice exercise it and move on.”

When the economy recovers and the company stumbles in regaining its capacity, heads roll, more cuts are made and finally the investors pull out – leaving the previously well-run company impaired or near collapse. No good has come from this, and why it is allowed to continue makes no sense – except that it takes little thought to order, gives investors the appearance of something good happening and something to report. That is why stocks rise when layoffs are announced – even in the face of predictable long-term effects of what the cost cutting means. That and the media’s cheering section that naively extols a short-term bump that may turn into a long-term fumble. Read More


Education-Employer Partnerships That Work

by Frank Gibson, Workforce Development Advisor, retired from The Ohio State University – Alber Enterprise Center

A lot is being said these days about “employer-responsive” worker training programs. I think all educational institutions want to believe they have all the answers to all of the challenges employers face. Although I have found that we had many of the answers for many disciplines, it was important to realize our limitations and either find other resources to fill the gap or be truthful with the client so that they might look elsewhere for those answers and solutions.

While a program manager for The Ohio State University – Alber Enterprise Center, which I worked at since its early beginnings in 1996, I learned the value of listening to the employer and providing them what they needed. The Center was founded on the premise of providing educational and technical consulting services to business enterprises throughout the region to help them grow and prosper. Whether to help them train their workers to the latest in technical skills or train their management on the latest management theories and best practices, the Alber Center assembled an extensive network of institutional and private training providers to meet their needs and continued to expand their network to help employer-clients maintain their competitive best.

While we felt The Center did a good job of providing foundation skills for all levels of an operation, we recognized that an educational institution cannot, and really should not, provide employer-specific, task-based training. It is not economically feasible for The Center to maintain the staff and expertise to service every small, medium and large enterprise in our region on processes that are unique to each. It takes a high level of maintained excellence to perform the necessary job and task analysis, develop the employer-specific training materials, train the employer’s staff to effectively implement structured OJT and mange this “systems approach” to build on the foundation our other programs provide.

The Alber Center realized it could partner with such an organization, Proactive Technologies, Inc., early on in 1996, to provide that level of service to its customers in a partnership that provides “turnkey” project services to employers. This approach combined related technical instruction provided by OSU-Alber Center and its network of specialists and structured on-the-job training provided by Proactive Technologies and its staff. Employers that The Center worked with over the years had been not only receptive, but some clients had continued to utilize this approach for over 20 years. And today, many of these visionary employers realize that they were among the first to embrace and implement an approach for which other employers still to this day only wish and hope to experience. Read More


WATCH VIDEO INTERVIEW

by Proactive Technologies, Inc. – Staff

James Ruble. Director of CTE & Student Pathways, Tri-Rivers Career Center & Center for Adult Education and Dean Prigelmeier, Founder and President of Proactive Technologies, Inc. sit down for a 30-minute interview with Kayleigh Aiken, Anchor of “Public Affairs.”

Mr. Ruble discusses Tri-Rivers Career Center’s range of workforce development services to provide employers with prospective employees. The Center develops students with the foundation skills upon which employers can build employer-specific/work-specific skills they need. He elaborates on new school initiatives to help employers and position the Career Center to be more of a partner for economic development.

Mr. Prigelmeier explains the widening training gap he witnessed that drove him to leave manufacturing and develop a software-supported worker development infrastructure and system that provides all of the tools of the human resource development and performance management process. Any change to the job requirements and all of the tools are updated to include it. Proactive Technologies provides infrastructure development and technical implementation support to make sure the investment is maximized and the client employer can focus on business.

“I wanted to make available to small, medium and larger companies the training development infrastructure and support of a Fortune 250 company, except with far greater returns for a tiny fraction of the investment. This approach is efficient, economical and leads to higher worker ROI and clear justification for the effort,” explained Prigelmeier. “By building an infrastructure around what most employers already have – an informal, ad hoc, undocumented and immeasurable one-on-one training experience – this approach cuts the employer’s internal direct and opportunity costs of training and quickly increases each worker’s capacity to full job mastery. Full job mastery means increases in work quantity, work quality and compliance (e.g. ISO, AS, IATF, NADCAP and safety). Each worker’s development – no matter if a new-hire, incumbent or cross-trainee – is driven to the same level of expertise established by the employer’s existing experts, with the progress towards mastery tracked, documented and reported monthly.”

“I like to partner with educational institutions such as Tri-Rivers Career Center whenever possible to better align all of their good work in preparing workers’ foundation skills, industry-general and industry-specific skills with, now, an employer’s internally structured on-the-job training infrastructure,” said Prigelmeier. “That’s how you continue to build upon the foundation laid and give every candidate an opportunity to succeed – a win for the worker, the employer, the community and region.” Watch the Video


Read the full October, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – September, 2024

The Worker Development Puzzle… For Many

by Dean Prigelmeier, President of Proactive Technologies, Inc.

After many years of setting up and providing technical support for employer-based structured on the job training programs, I can say with confidence that most, if not all, employers have significant weaknesses in their worker development process. If pressed, I believe most employers are aware of it, but have become comfortable with the mistaken notion that “it is what it is.,” Some are unaware and frustrated at the lack of results when hiring new workers to maintain or build capacity; accountants show signs of concern when hiring adds labor costs and often results in lower production output. Others in management may be concerned with unsustainable poor output quality or an increase in product or service scrap or rework.

Hiring more workers is not always the answer to the apparent lack of capacity to take on new product lines and new projects. Many employers overlook the fact that there is a tremendous amount of untapped capacity among the existing workers who have never had a chance to be fully trained for the jobs for which they were hired. The reason: most companies have remained in the unstructured, informal, undocumented one-on-one task-based training mode – even though the tasks are often transforming and the skills required for jobs have continued to increase in complexity.

Understanding the “chemistry“ of worker development is key to maximizing the return on worker skills and efficiencies. If an enterprise is struggling to increase output given the current staffing levels, adding new workers to compensate may often yield even less output. The simple reason being that a new person with no demonstrated skills or relevant capabilities is paired with a higher paid subject matter expert who is to transfer their expertise in an unstructured, ad hoc and undocumented manner. For however long this unstructured experience takes, one person who used to be very productive is now training a worker who has little or no productivity, doubling the loss of capacity rather than increasing capacity to increase productive output. As production output falls, the subject matter expert trainer may feel compelled to take up the production slack – putting more distance between them and the trainee. During the probationary period, the new-hire doesn’t know what they don’t know and what is not being trained, so they may feel the only solution is to lay low.

This experience can take 2 to 3 times longer than necessary and the new worker may be trained to only 20% of the required tasks that management and expects. For however long this takes to transfer a full job set of expertise, two people (not one) are drawing pay and underproducing.

The only way to get the subject matter expert back to work so they can continue to produce at the high level previously witnessed and add a fully functional and capable new employee to the aggregate capacity, is to structure the on-the-job training process. Structured on-the-job training (“SOJT”) is task-based, including all of the critical tasks that make up the job classification. If an operation has standard work instructions, these can be incorporated into the SOJT infrastructure, which helps with ISO/IATF/AS and NADCAP compliance. Read More


Lessen Gen Z Workplace Anxiety – Make Training Deliberate and Engaging

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

In an article in Business Insider entitled, “Gen Z is bringing a whole new vibe to the workplace: anxiety,” author Eve Upton-Clark tried to shed some light on a contemporary topic considered enigmatic by some and over-blown by others; Generation Z and its journey into the workplace.

Understanding generational shifts in behaviors and expectations are a never-ending role of employers and their management. Having a better insight can make the experience a little less challenging for everyone.

In her article she writes, “Anxiety is driven by uncertainty,” Ellen Hendriksen, a clinical psychologist and the author of “How to Be Yourself: Quiet Your Inner Critic and Rise Above Social Anxiety,” said. Because they grew up in the digital age with nearly unlimited amounts of information at their fingertips, Hendriksen said, Gen Z has the least experience with uncertainty. “When you need to know where to go, you can pull up Google Maps,” she said. “If you are going to a new restaurant, you can look at the menu ahead of time. There’s a lot of certainty in this world now which didn’t exist before.”

She continues, “But at work, there’s often a lack of certainty — which gets exacerbated in a remote workplace where it is easy to avoid confrontation. “Anxiety is maintained by avoidance,” Henriksen said. “Our first reaction when we are anxious is often to avoid the thing that is making us scared, and so if we are anxious about speaking in a meeting, we might remain silent. If we are anxious about taking phone calls, we’ll let those calls go to voicemail.” Further, “Whether sensing when a presentation has gone on too long or understanding the subtext of what someone is saying, managing how you work is a fundamental skill.”

Whether a Gen Z or Baby Boomer, how we are trained once hired is a crap shoot. The ubiquitous “Bob, this is Julie. Why don’t you show her around” is institutionalized as what most employers call “on-the-job training.” Read More


The Employers Have the Most Advanced Equipment Available for Training

by Frank Gibson, Workforce Development Advisor, retired from The Ohio State University – Alber Enterprise Center. Currently an Independent Business Consultant

Community and technical colleges, career centers and joint vocational schools have always struggled with how to make a positive difference in workforce training. They often bear the brunt of criticism for the “skills gap” employers report when, in reality, employers share equally in the responsibility. Educational institutions have only the resources and capacity to provide core skill training upon which only employers can then provide on-the-job training to drive trainees to the job mastery needed.

Educational institutions are often tempted to assume more of the employer’s role in worker development but run into budget, feasibility and practicality limitations. This distracts them from their very important role of maintaining perpetually relevant core skill and related technical instruction that a high-quality technical education requires. Trying to provide all things to all employers never was the role of educational institutions so they should not take it too personally when good-intentioned efforts do not reach the expectations for them.

These institutions are often encouraged to use their limited resources to buy equipment or build facilities in order to support “customized, hands-on training.” The employer already has the facility and the latest technology in that community. The hard part has been convincing the employer that the school has a viable strategy that makes the employer want to imbed structured on-the-job training into the onsite natural order of learning the job. It would be even harder to convince them a training program, targeting a specific job of theirs, can be more effective offsite at a training facility than onsite.

Technology shifts so fast these days, and the focus of workforce training is so volatile, that it makes little sense for educational institutions to purchase equipment for training when only a few employers have similar equipment and the equipment may be obsolete before the school gets through the purchasing, installation and instructor training stages let alone before someone completes a 2-year training program. In addition, the company or companies that were targeted for this training might be acquired, closed or moved – leaving before any return on the investment of time, money and facilities are realized. Read More


Keeping Employers Engaged in Regional Workforce Development Projects

by Dean Prigelmeier, President of Proactive Technologies, Inc.

Billions of dollars have been spent on workforce development projects funded by the state and federal governments in the last 20-30 years. However, from the tone of the discussions surrounding workforce development projects and participants today, it seems that the same things that were troubling employers in 1980 are still troubling them today.

Getting an employer to sign up for a grant-funded workforce development project should not be that difficult, if the brands and reputations of the institutions promoting the project are sound, and the project concept appears logical, achievable and will in all likelihood contribute to the employer’s business model. But once the pitch has been made to the employers and the bold outcomes projected, keeping the employers engaged for the duration of the project and beyond can be difficult.

One thing that I have found in setting up and maintaining long-term projects is making sure the person, or people, at the initial meeting are the right ones. “Worker development” seems to fall within the domain of the employer’s human resources department. But not all human resources managers are the same. Some are fresh from college and may not yet have experience with concepts such as meaningful on-the-job training, integration of worker training with ISO/IATF/AS and NADCAP compliance, etc. Some tend to be generalists and may enthusiastically agree with a project concept but are out-of-sync with their production and quality manager’s view of the world. While you may be able to get the human resources manager on-board, the human resources manager may not reflect the interest or concerns of the more influential production or operations management and staff.

Unfortunately, this may not be discovered until months into a project. If the operation’s management and staff were briefed on the project (sometimes they are not), out of deference to the human resources manager the other key stakeholders may not voice concerns or ask pertinent questions that may influence the nature of the project. This may later start to percolate up and bring the organization’s participation in the project to a halt. Read More


Read the full September, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – August, 2024

Reluctant to Reshore Due to Apparent Shortage of Skilled Labor? Don’t Be

by Dean Prigelmeier, President of Proactive Technologies, Inc.

These are relatively uncertain times for some manufacturers with supply chains that transcend borders to countries subject to punitive tariffs, and/or social, political and economic unrest. Knowing where to invest time and precious resources isn’t as clear as it was a couple of decades ago, yet that is the situation many are in.

We all remember how quickly companies relocated part (in some cases all) of their operations, and/or prodded their suppliers to do the same, to lower wage, lower regulation and lower property cost environments – regardless of the transport costs, and risks of regional instability and supply chain disruption. As those economies developed and the associated operational costs increased, those perceived savings continued to erode. And as regional instability rose, many employers started to plan their next move. Once again, the U.S. looks like a viable site alternative.

One over-hyped and inaccurate factor in the U.S. is the shortage of skilled labor, which some workers see as a veiled attempt to justify importing labor who will take the job for significantly less. There are plenty of skilled labor available who were displaced during the Crash of 2008, or displaced by the trade wars, and who had to change career course to feed their families. Many of these workers are still waiting and could be quickly and easily “re-tooled” for today’s manufacturing jobs with a focused structured on-the-job training program. Some are kept from seeking out these opportunities by wages and benefits for the job they once had now offered at 50% – hardly enough to attract skilled candidates back not to mention for retaining a “skilled worker.”

click here to expand

Some see this as a sort of hypocrisy; the publicized, frantic search for “skilled” and “talented” workers, while offering these skilled workers less for the job they once held with that employer or a similar employer in the industry. So, for now, many of those workers that are that skilled and talented abandoned the career of their choice for the career that pays the bills.

Unless employers can convince their shareholders that wages and benefits have to go up to attract the workers they prefer, employers will have to accept the candidates that remain of which there are plenty. These are the ones with the college degrees you see working in service positions, just waiting for an opportunity to apply their skills to a job with more substance. Read More


Challenge Employees with Self-Improvement Opportunities to Head-off Burnout

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

Let’s face it. Routine work can be boring. Doing the same work for extended periods can affect an employee’s attitude toward their job, employer and life. There are things employers can do to alleviate the tedium of work they need performed, keeping the incumbent employee interested and engaged and the new-hire curious and open-minded.

Workers of all ages are showing frightening levels of decline in engagement with their work. According to a recent Gallup survey, “The New Challenge of Engaging Younger Workers:

  • “42% of employees who are looking to find a new job say they feel their company is not maximizing their skills and abilities.” (Deloitte)
  • Among the reasons for quitting, career development is the most common for employees that leave within their first 90 days in a company. (Work Institute)
  • According to LinkedIn research, “94% of workers say they would be more likely to stay at a company if it invested in their career.”

With the natural increase in retirements and the loss of technical expertise, losing workers unnecessarily seems to be risk no one would want to take.

click here to expand

These data points were reenforced by other measures viewing the employee attitudes from another angle. According to HR Dive, about 65% of employees said they suffered from burnout last year, according to a Dec. 18 report from isolved, a human resource management system. Employee burnout has decreased somewhat compared to 2022, according to the report, but it’s still heavily affecting productivity. About 72% of employees said burnout impacted their performance.”

Burnout has continued to rise across all age groups. Conversely, engagement has proportionately declined. While troubling if left unaddressed, actions can be taken reverse these trends. Read More


The Challenges of “Team Building” Projects

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

We have all been there. Assigned to a project along with several others and declared “a team.“ Sometimes they work well, sometimes they result in endless meetings, endless meaningless reports, rivalries between team members as some jockey for position to be seen by management, or worse yet, the team is hijacked by that one self-appointed “leader” in the group that is convinced they know everything, but evidence shows quite the contrary…and the more that is pointed out, the more they feel threatened and push back.

Team building is a “collective term for various types of activities used to enhance social relations and define roles within teams, often involving collaborative tasks.” It is also a management tool to “expose and address interpersonal problems within the group.”

Whenever people join together to work on a common project, no matter if it is two people or 20 people, the organizational dynamics and personality differences, the aspirations of the individuals and each member’s level of dedication and self-motivation will determine the outcome of the project more than the importance of the assignment itself. In cases where that one, perhaps overly ambitious, individual who has learned to control the agenda through intimidation, or the team wanders without direction, other team members (and potential team members for future projects) may react in various ways – some very undesirable. These include:

click here to expand
  • Timid behavior – reluctant to offer input to the team for fear of criticism, uncomfortable in a team setting or with team members;
  • Ambivalent behavior – team member shows up late, seems distracted, doesn’t participate in conversations and/or turns in late or weak assignments;
  • Skeptical behavior – those with more experience with project management can assess the team’s efforts and conclude it will never reach its goal, then distance themselves being concerned for their image being connected to the predictably failing project;
  • Conflictive behavior – contributes to the team only when pushed and/or only when they agree with the reason for the assignment, quick to argue with other team members, seeks to keep team fighting among themselves;
  • Combative behavior – takes actions to sabotage the team and its efforts, publicly broadcasts objections to team members or team decisions, undermines the team’s efforts by “poisoning” the workplace before or after the team’s results are released.

Obviously, there are many other possible undesirable outcomes from an imbalanced team or team goal, or an inappropriately selected team leader. A team approach to project management can be effective if the right steps are taken. Here are a few of the obvious: Read More


Replicating Your Best Performers

by Dean Prigelmeier, President of Proactive Technologies, Inc.

One project I was involved with sought to establish a structured on-the-job training program for a “CNC Operator” position and establish an apprenticeship. It consisted of around 40 different machines; manual and NC-operated of several brands, controller types and purposes. When I perform a job/task analysis on a job classification – task by task – I first contact the resident “subject matter expert.” It is my experience that in lieu of accurate standard process documents that everyone can use when assigned a machine, each operator keeps their own setup and operation notes. They are usually reluctant to share them.

As analysts, we assume that if the subject matter expert is assigned to us, it is a reflection of management’s confidence in the operator’s consistently high level of performance. We also learn a lot about the sub-culture that has arisen at the organization, bordering on “work performance anarchy.” Despite the connotations, this is a useful revelation. This lack of vital information sharing that has been going on can be eliminated. The collective wealth of task-specific information can be screened, validated, standardized and revision-controlled to be shared with all who are asked to perform the tasks.

This highlights several other preexisting issues in addition to the obvious. First, if the company is ISO/AS/IATF certified, an auditor would be appalled and likely “gig” the company for the use of uncontrolled “process documents.” Notes in toolboxes and lunchboxes are not revision controlled. If the company has even questionable process documents that they claim drive their “high level of quality performance” the existence of operator notes are a strong contradiction. A client visiting the site may have serious doubts about the practices, as well.

click here to expand

The next issue is, “what role do these notes play in the training of new-hires and cross-training incumbents?” Does the trainee even know these are available? My experience has been that each trainee is on their own to create their own notes…if they even think it is necessary. So now we have multiple sets of notes for each machine, seldom compared and standardized, AND the company’s process documents if they exist. This is a recipe for incidents of scrap, rework and equipment damage at a minimum.

It also appears that each trainee is on their own to learn the safe performance of each task. It is not enough to provide general safety knowledge learning.  Read More


Read the full August, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – July, 2024

Confusion Over What Constitutes “Training” is Stumbling Block to Effective Worker Development Strategies

by Dean Prigelmeier, President of Proactive Technologies, Inc.

For the anyone searching for information to help them choose a worker development strategy, a web search of “on-the-job training methods” might produce thirty or forty informative, but confusing, charts. The search result is a mixture of domains, methods, philosophies – one seemingly in conflict with the other. A non-practitioner of workforce development strategies can gather from this search result alone why there is a perpetual state of confusion between even “experts,” marked by decades of employer and trainee disappointment in the lack of recognizable strategies and outcomes, which are often devoid of meaningful results.

Over the years, approaches and methods have evolved out of their ineffectiveness, many diverging from the basic principals of workforce development. Markets for products to address these approaches grew and well-funded marketing began to find unaware customers. The notion of “training” morphed into branded versions of “learning,” selected not so much on their basis in logic, but more on the lack of “smart” choices and how well the marketing effort worked.

“A great first step is to clearly differentiate between “learning” and “training.” The strategies, methods of delivery and outcomes for each are very different. Without such clarity, one might mistakenly invest heavily in a strategy to accomplish worker development objectives that, instead, uses up vital resources and scarce opportunity, and sours the organization’s attitude toward training for years to come.”

click here to expand

The acceleration started around 40 years ago. Prior to that, job classifications did not change much and were relatively simple in structure. Then panic set in over the approaching “skills gaps,” as computers were introduced into every aspect of our lives. Fear of baby boomers nearing retirement, taking their technical expertise with them, added to the challenge. Solutions started to appear out of academia, based on the world they knew and not as much on the world they were trying to improve, as they would have liked to think.

Did these methods address the workforce development challenges of their time? Read More


Employers Say They Struggle With a “Skills Shortage,” Yet They Cut the Training Budget. What Gives?

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

Everywhere you read these days, you find commentary on the “skills gap” that employers seem to face when trying to find the workers they need for their critical job classifications. Either there is a skills gap or there isn’t, and more and more economists are challenging that premise. Some, like Nobel prize winning economist Paul Krugman, say that if there is such a skills gap creating a shortage of skilled labor, then wages should be skyrocketing for those positions in a capitalistic, free market model.

Some point to the exploitation of loop-holes in the U.S. H-1B visa program, recently highlighted in a CBS 60 Minutes episode entitled “You’re Fired” that allows employers to replace long-time, experienced employees with lower-wage temporary workers (with no benefits) from countries such as India – even requiring the laid off worker to train their replacement or forego severance pay.

Yet other companies, genuinely experiencing a shortage of skilled workers in their region, seem to either accept the skills gap theory as the norm or have made assumptions that the right skilled workers already came through the front door. Some surprise everyone by redirecting training dollars that should be used to make sure each employee can perform the tasks for which they were hired to programs that are meant to improve performance – skipping the obvious. Trying to improve the performance of employees before being certain they can perform each task exactly seems incredibly counter-intuitive. Focusing dollars on LEAN, Kaisan, Six Sigma, etc. before being certain that employees have mastered each required task may be not only be a waste of money but probably will need to be repeated if the employees finally do master each task, since by then they will have forgotten any improvement techniques or how to apply them to the processes they are performing.

click here to expand

Some wonder why companies have not added to, or are even cutting, their training budgets in response to the challenge. Read More


Jack of All Trades, Master of None

by Dr. Dave Just, formally Dean of Corporate and Continuing Education at Community Colleges in MA, OH, PA, SC. Currently President of K&D Consulting 

Jack of all trades, master of none” according to Wikipedia “is a figure of speech used in reference to a person who has dabbled in many skills, rather than gaining expertise by focusing on one.”

The shortened version “a jack of all trades” is often a compliment for a person who is good at figuring out how to fix and do things, and who has a broad knowledge base. These types may be a master of integrating diverse knowledge topics, such as an individual who knows enough from many learned trades and skills to be able to bring them together in a practical manner to perform a task that is a subset of a craft or trade area. This person considered a generalist rather than a specialist.

There are many examples of this. The individual who can do his/her taxes each year, but would not be qualified to do others. Someone who can figure out what is wrong with the dishwasher, but reaches a point where the repair is out of reach. A lawyer who has passed the bar, but failed to specialize in an area of law to be the “go-to” guy for a particular case.

The “master of none” element appears to have been added to the phrase later to augment the meaning of the compliment; making the statement less flattering to the person receiving it. Today, the phrase used in its entirety generally describes a person whose knowledge, while covering a number of areas, is superficial to all of them.

click here to expand

Some modern apprenticeships are so generally focused that it is unclear who they benefit. Including general industry skills and even skills that may become useful in the future is well-intended, but the primary focus should be the mastery of tasks the current or identified future employer needs performed. That is the historic meaning of an apprenticeship. Even as a secondary priority, the hedging of bets that industry-general skills will be needed in the future depends greatly on whether jobs requiring them will materialize and the apprentice will get to apply these skills before they forget them from nonuse. An over-emphasis on predictions can yield students that graduate with irrelevant skills, and employers left with the responsibility to provide more than the task-based training one would expect. Impatient employers, and employers that do not understand the deficiency in employment candidates enough to understand the impact, are left to wander through the myriad of options and false options while trying to maintain a thriving enterprise. Read More


A Simple, Low-investment Solution to Closing Skill Gaps; New-Hires and Incumbents

by Dean Prigelmeier, President of Proactive Technologies, Inc.

Proactive Technologies, Inc. has worked with many employers over the years, establishing and technically supporting cost-effective, task-based structured on-the-job training programs. For each employer, every effort is made to tailor the worker training system to accommodate the employer’s budget, job classifications (even unique training programs for each job classification in each department), business goals and manage the system through all types of change. Unlike some products or services that require the employer to change practices that work in order to utilize them, the PROTECH© system of managed human resource development  is built around what is working for the employer, incorporating established information such as work processes and specifications, safety standards, quality standards, etc. This approach minimizes the need for the employer’s culture to drastically change what works for them, focusing instead on improvements in an area of weakness.

“There is no doubt this approach is effective. After all, what is better: unstructured and haphazard worker training that cannot be explained, measured, improved or understood, or structured on-the-job training for all workers that is easily measured, implemented, improved and explained to auditors?”

The main steps used to build an employer-based structured workforce development system starts with understanding the desired outcome first: Read More


Read the full July, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – June, 2024

Sobering Polling Data That Warns Employer’s to Take Worker Development Seriously

by Dean Prigelmeier, President of Proactive Technologies, Inc.

FinanceOnline.com published a great compilation of polling results and statistics, along with their source, in “112 Employee Turnover Statistics: 2024 Causes, Cost and Prevention Data” that lists the results of a large number of worker turnover, development and retention polling outcomes – 112 to be exact – to allow the reader to form their own opinion. I have highlighted a few of the points verbatim in this article, but I encourage you to review the complete list. The one common factor is that the employer has not done a good job developing and managing their workers for the outcomes they say they expect and are losing massive amounts of money and opportunity as a result. For die-hard short-term planners, these are short-term challenges with real, significant short-term consequences that compound year after year to become the long-term collective challenges that may become insurmountable.

While we are bombarded by polling statistics today, here is some information to help you decide the relevancy and accuracy of the explanations resultant from polling. What used to be useful guidance explaining current trends or predicting future movements in the economy or society, polls seem to have devolved into a hyper-version of marketing often confusing us with data that conflicts with the reality we experience – leading us to reject data that is relevant and to unwittingly accept data that is engineered.

There are many types of polling. The accuracy is usually determined by the poll size (number of respondents), poll stratification (are all variants of polling targets considered. Example: “Are you better off today than 4 years ago” – answer depends on which end of the economic spectrum the respondent lives, what exactly the question refers to and if seems relevant), the question validity (how well the question was designed. Example: the previous question contains a lot of ambiguity and opens the door for the respondent’s interpretation) and pollster’s bias (is the pollster unbiased in their expectations of the results or looking for results that support a previous held opinion).

“Each resignation can cost a company up to a third of the worker’s annual salary. 67% of which often come from soft costs like reduced productivity but 33% come from hard costs like recruiting, hiring temp workers, and the like.”(SHRM)

click here to expand

One of the more nefarious methods is “push-polling,” which is used to steer a respondent toward a particular opinion, not solicit it. The questions are structured as such to subliminally convert the respondent to a certain side or view. Push polls have been used for political campaigns for some time, but are ubiquitous today in world of influencers with hidden agendas. They can help to engineer “trends” that shape well-funded investment market positions or bring dictators to power by congealing disgruntled groups into an influential voting block.

“A trillion dollars. That’s what U.S. businesses are losing every year due to voluntary turnover. And the most astounding part is that most of this damage is self-inflicted. (American Machinist)”

The key to extracting relevancy from polling results is to be open minded. Interpret them for believability by looking at the source; do they have a credible track record. If you can, determine the question format, polling sample size and margin of error in the results. When possible, compare polling results from several sources in search of a common thread. This can help you determine the veracity of polling results. Read More


Challenges Presented by the Widening Skill Gap

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

There are at least five growing, major challenges to maintaining a skilled national labor force. These forces are causing those organizations who could help to, instead, spend tremendous sums of money on “whack-a-mole” type efforts. Sure, this approach sustains all of the profit and non-profit organizations that sprung up to take advantage of the chaos, but if we are serious about solving this issue that has undermined economic recoveries and stifled economic growth for over 30 years, we need to get serious.

It starts by critically evaluating the challenges that have plagued the U.S. labor force and have been barriers to an employer’s commitment to American labor. Like nearly all challenges, one can choose to target the underlying cause, treat the symptoms, mask the symptoms, define an alternative – but not necessarily relevant – cause and focus on that, or ignore symptoms and cause and hope for divine intervention.

Choice of action matters. Take, for example, the choice to take a prescribed “cholesterol lowering” statin that inhibits the body’s production of lipids – fats and fatty substances, producing a cholesterol number within an acceptable range but at a cost of blocking or impairing other vital body functions and often producing “side-effects.” Your doctor may have good news about your cholesterol level during this visit but soon he might be discussing other, more serious issues with you such as, according to the Mayo Clinic, your muscle pain and damage, liver damage, increased blood sugar and type 2 diabetes, neurological side effects… Choosing to treat a symptom without determining why your body is producing excess lipids in the first place may leave the underlying cause unaffected.

click here to expand

Similarly, focusing resources on symptoms and ignoring the underlying cause of a non-systems approach to worker development may lead (and one could say may have already lead) to depleted resources and lost opportunity. Read More


Cross-Training Workers After Lean Efforts Builds Capacity Using Existing Staff

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.  

Lean activities to redesign processes for better efficiency in a department, or between departments, sometimes result in “surplus” workers – partially or in whole units. It is the subjective priority of Lean practitioners since it is a tangible illustration of a successful Lean improvement. Processes that previously needed 3 people to complete may now only need two, if the efficiency were discovered. So what happens to that one person that has valuable acquired expertise, representing a significant investment by the employer? Would the wise outcome of Lean efforts be to just cut that person from the lineup?

The short answer is most likely not. Any efficiency and cost savings brought about by the Lean redesign would be offset by the loss of the expertise for which the investment has already been made. Most likely the reason for the Lean was not in reaction to no return on worker investment, but rather a desire to increase the return on worker investment.

If the worker is reassigned to another department, and no task-based training infrastructure is in place, that reassignment may lower the efficiency there which, again, reduces the gains made by the Lean effort. So part of the Lean effort must be the deliberate cross-training of workers in temporary assignments or longer-term reassignments to other departments that seem to have the need for increased staffing, perhaps as a result of the increased throughput achieved from the Lean effort in the upstream department in the chain.

click here to expand

Another outcome of a lean effort may not include moving personnel, but either equipment or processes out of the Leaned department into another department up or downstream, often without structured training to absorb the new activities and maintain efficiency. Here the loss of gains made are similar if no training on how to perform the processes or run the equipment is provided.

In an efficiently run organization, every department has detailed, documented best practices and training materials that are always maintained, and training tracking systems to ensure cross-training occurs quickly and to the necessary level of performance and capacity. In an organization that does not have these systems, any gains and efficiency expected from Lean efforts may be unnoticeable or, worse yet, non-existent or negative. Read More


Supervisors and First Line Management Need Structured On-The-Job Training, Too

by Dean Prigelmeier, President of Proactive Technologies, Inc.

It seems every organization is scrambling to “lean” the operation these days. This implies producing the same amount of output, or more, with decreased amount of inputs by fine-tuning logistics, internal work flows and processes. Workers get moved around or out, and processes get reorganized and relocated.

Changes to the operation signal that the workers responsible to implement changes will need to know the new way of doing things. All affected workers, all shifts. Yet, often very little thought is given to the effectiveness of improvements if not everyone is one the same page.

“One of the supervisors who participated in the program development said with clear certainty, ‘I wish you had this when I started. When you hired me, I was just shown my desk and told to call HR or the manager if I had any questions. Yes, you had me attend some management classes on leadership, quality and striving for excellence, but I really couldn’t connect what was learned to my job since I had not yet learned what I was supposed to do and how to do that well. Until we completely analyzed all of the tasks that make up my job, I really had no idea which tasks I never have had a chance to learn or even knew I needed to learn them.’ ”

What should be an obvious “must,” the notion that increasing worker capacity at all levels through task-based, deliberate, documented, measurable and verifiable structured on-the-job training is often usurped. It is replaced by a policy of hopefulness that workers will learn to perform the tasks of their job on their own or by osmosis or, even less effective and disappointing, attending a class here and there in expectation of closing the “skills gap.” I often discuss this in the context of production or service workers, but this extends to all levels of most organizations. The impact doesn’t go unnoticed by controllers and CEO’s under pressure to increase revenue or lower costs, but measures to correct this imbalance are seldom explored let alone utilized.

click here to expand

Invariably, the most target-rich environment for harvesting huge savings and significantly increasing capacity is bypassed – either from a lack of understanding of what it takes to be a “subject matter expert” or entrenched neglect. Ignoring the need for structured on-the-job training is like investing in a state-of-the-art machine, then waiting for it to set-up and program itself. Even artificial intelligence needs someone to train it the first time to do the things expected in the proper way.

When one considers the serious collateral damage caused by underdeveloped or underutilized worker capacity (e.g. scrap, rework, loss of “tribal knowledge” when someone retires or moves on, loss of customer confidence, loss of employee confidence), red flags and alarms should be going off continuously, since all of these are present on a daily basis. But distractions and diversions seem to get in the way. Several articles have appeared in the Proactive Technologies Report newsletter that discuss these costs in more detail, including: Estimating the Costs Associated With Skipping Employer-Based Structured On-The-Job Training  and The High Cost of Employee Turnover. Read More


Read the full June, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – May, 2024

“Full Job Mastery” means “Maximum Worker Capacity” – A Verifiable Model for Measuring and Improving Worker Value While Transferring Valuable Expertise

by Dean Prigelmeier, President of Proactive Technologies, Inc.

It is no secret that with the traditional model of “vocational” education, the burden of the job/task-specific skill development falls on the employer. It is not economically feasible nor practical for educational institutions to focus content on every job area for every employer. So they, instead, focus rightly on core skills and competencies – relying on the employer to deliver the rest. This is where the best efforts of local educational institutions and training providers begin to break down even if highly relevant to the industry sector.

Employers rarely have an internal structure for task-based training of their workers. Even the most aggressive related technical instruction efforts erode against technological advances as every month passes. If core skills and competencies mastered prior to work are not transformed quickly into tasks the worker is expected to perform, the foundation for learning task performance may crumble through loss of memory, loss of relevance or loss of opportunity to apply them.

New workers routinely encounter a non-structured, rarely focused, on-the-job training experience. Typically, the employer’s subject-matter-expert (SME) is asked to “show the new employee around.” While highly regarded by management, the SME (not trained as a task trainer and having no prepared materials) has difficulty remembering the nuances of the tasks when explaining the process to the new employee, since that level of detail was buried in memory long ago. Each SME, on each shift, might have a different version of the “best practice” for processes, confusing the trainee even more – rendering the notion of “standardization” to “buzzword” status.

click here to expand

Initially, new employees have difficulty assembling, understanding and translating the disjointed bits of recollection into a coherent process to be replicated. Each comes with their own set and levels of core skills and competencies, and learning styles vary from the self-learner/starter to the slow-learner worker who, with structure to make sure they learn the right best practice, may become loyal, high-quality workers.

The more time the SME spends with the new employee in this unstructured, uncontrolled and undocumented experience, which is the prevailing method of on-the-job training, the more the employer is paying two people to be non or minimally-productive. Read More


Is AI the Next IoT? When Considering a Major Shift in Worker Selection and Development Strategy, Haste Might Make Waste

by Stacey Lett, Director of Operations, Eastern U.S. – Proactive Technologies, Inc.

Artificial Intelligence (AI) is the all-consuming topic of the day. The media, as with the Internet of Things (IoT), is the vehicle with which a well-financed marketing campaign is transformed into an illusionary “trend” train that we are all shamed into boarding lest we will be left behind. Whether being left behind is a good or bad thing is yet to be determined.

Potential employees have already been showered with generative AI employment scams, does it really make sense to turnover the recruiting, selection, training and managing responsibilities over to AI as well? The rush to IoT has left the backdoor open to any form of lone wolf or criminal organization to exploit as we are experiencing every day. Without repairing the holes in the existing interconnectivity, does it make sense to add more known risks to it?

Where there is money, there is the “newest trend” to consider. Often not actually a trend, they are more like a well-funded marketing scheme as we have come to know by hedge funds that have amassed trillions and need things to invest in to expand their presence and dominance. AI represents the culminative test of the employer’s ability to read to tea leaves correctly and the most significant challenge to employee’s gainful employment yet.

Companies collectively spent $101.6 billion last year on related technical instruction, most of it informal, unstructured and undocumented on-the-job. Structuring what is already in place to make it deliberate, efficient and documented is a tremendous start and employers do not need AI for that. But it does take incorporating a coherent worker training strategy into the firm’s business model and treating employees as “investments.”

click here to expand

Prior to AI, the main technological platforms for evaluating candidates were based on a key-word search technique invented for the intelligence communities to read mountains of written material for intelligence on pending activities, threats and developments. It searched for key words and phrases associated with known perils, and the technique was applied to reading resumes. Read More


Two Common, Unfortunate Mistakes: The Importance of Setting Up Separate Accounts When Receiving Training Grant Funds

by Frank Gibson, Workforce Development Advisor, retired from The Ohio State University – Alber Enterprise Center

Two common, unfortunate mistakes that can derail a company’s sincere effort to address the training gap at their firm are easily overcome, but toxic if unaddressed. Getting upper-management on-board with trying to build a deliberate training infrastructure is not easy, as most who have tried have found out. Taking preemptive measures to avoid these land mines seems worth the while.

The first, the champion who took the initiative to create a training strategy, lobby for it and attempted to implement it at their operation fails to establish proper leadership of that effort. W. Edwards Deming often said, “divide responsibility and no one is responsible.“ And something as important as establishing a new, deliberate training program to address the neglect of the past has to be led by someone who recognizes that fact, understands the implications and knows how to lead the effort to successfully reach its goal.

Some firms believe that putting two or three stakeholders in charge, for which none of them have the background and experience, to manage a training strategy is sufficient to lead the effort. This false notion that “political buy-in” outweighs selecting the right leader, or elevating people with time on their hands to something they lack experience for is sufficient, can be a fatal miscalculation. This usually leads to the project falling far short of its goals and/or interest waning as results seem to come up short of expectations. This can lead to those in charge vacillating between taking blame or credit instead of making sure the project succeeds. Another example is when the “leadership group” is lopsided and one, or a few of, the team has more knowledge and experience in setting up and implementing a training strategy but lacks the votes on critical decisions.

click here to expand

This can lead to conflict and hard feelings that jeopardize the cohesiveness of the group and its message. Deming also said, “You have one chance to train a worker, only one so don’t muff it.” Picking and supporting a good leader for something as critical as training of necessary workers is a valid solution to avoiding this dilemma.

The second mistake often made that can sink a worthy project resides in the accounting department. Read More


“Inflation;” It is More Than the Rate That’s the Problem

by Dean Prigelmeier, President of Proactive Technologies, Inc.

The main reason the fight over inflation lingers year after year, decade after decade, isn’t just the rate that is reported. That is important, true, but what is more important is what happens after. Once prices rise to an impactful level, do the prices return to a more acceptable level or are they just a step in a long-term plan of inflationary surges that drive the prices higher still?

Prices are, what economists call, “sticky in the upward direction” – a glossy way of saying once prices have risen higher, good luck getting them down. The term sticky was a more legitimate description associated with business cycles of 30 – 40 years ago, when inflation was more determined by consumer demand. Higher prices resulted in lower consumption, causing business analysts to find where the supply and demand curves cross; equilibrium point.

What changed was the concentration of market share, both laterally and vertically. In the past, policymakers took steps to preempt monopolies and oligopolies from forming and operating. Many remember the break-up of AT & T in the 1980s when it was thought it had too much market dominance. Too much market share controlled by one or a small few firms meant that price coordination was easier and competition jeopardized. Since the late 1990s, a new interpretation of classical economic theories for incoming neoliberalism was needed to reexplain U.S. capitalism in a new world context, so new economists were needed to dominate the messaging. We were meant to understand that so many potential competing multinational companies, the odds of monopolies and oligopolies emerging were slim.

click here to expand

But in typical capitalism fashion, as multinational companies became bigger and could attract more capital, they began buying up competitors and their supply chains (“vertical monopolization” in many cases. The powerful grocery chains that remain are a good contemporary example.). Even though these powerful market drivers pleaded that there was still plenty of competition out there, one would really have to selectively analyze the data to support that claim in a material way. Read More


Read the full May, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – April, 2024

Thinking Holistically About Worker Development

by Dean Prigelmeier, President of Proactive Technologies, Inc.

Every potential worker and incumbent worker possess enormous value, waiting to be first developed then realized. Too often the opportunity is lost at development, and the value remains untapped or marginally realized. Lack of effort, or lack of relevant effort, yields lackluster results.

When an artist approaches a canvas, they see a blank surface waiting only for their effort to turn it into a work of art. They work to utilize every bit of white space to bring out its potential contribution to the overall vision. They, too, are applying developed expertise in the performance of work. If they’re in it for money, they know that an unfinished painting or drawing minimizes the return on the resources utilized. Yet they’re not disappointed with a unfinished piece and do not blame others if they, themself, don’t put in the effort, they continue until they are satisfied that they have done all they can and the piece matches their expectations.

Each potential worker is like a blank canvas. Educators know that it is their responsibility to bring out the best of each student that passes through their classroom. They know that if they fail to present to potential workers new and relevant skills needed for continued educational growth, and/or current opportunities in society, they have produced an unfinished work of art with limited value and future potential.

click here to expand

When that potential worker reaches the doorstep of the opportunity an employer provides, not only does the employer need to remediate the core and general skill deficiencies that might exist, they need to continue the development of work-based core and general skills as well as task-specific skills for which the potential worker was recruited. If not, the unfinished canvas that managed to leave the educational process merely receives a touchup yet remains unfinished. As with the artist, the employer should not be disappointed in the worker if they do not put in the effort to develop it, nor should they blame others. The opportunity to do so was there, although most likely dissipated due to inaction or in adequate action – often because the remaining “resident experts” are busy keeping up with production with little time (perhaps little interest) to take a trainee under their wing – especially with no structure, definition or metrics to what is to be trained.

Assuming these workers are retained, an employer can amass a stable of workers (50, 100, 500, 10,000 employees) with yet to be developed potential. Employers might scratch their head and wonder why the company suffers from poor quality of product or service, inability to reach its production targets, inability to accommodate growth opportunities when they arise, and turnover; a low return on worker investment. They may soon find themselves staffed with a lot of disgruntled workers viewing this outcome from their different angles: few opportunities to establish themselves and demonstrate their value to the company, dismay over lack of opportunities for personal growth within the company or fear of dismissal for too many visible mistakes that could have been prevented by receiving proper training the first time, not finding out they self-taught themselves wrong by mistake.

The amount of resource waste that the symptoms of inadequate training reveal can be staggering!  Read More


Have You Captured The Expertise of Your Critical Hourly and Salary Positions?

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

Starting in the late 1980’s, employers became increasingly concerned with succession planning; ensuring salary workers were being groomed to replace critical senior employees in the event of retirement or voluntary/involuntary separation. It was realized that the potential disruption – direct and the ripple effects – caused by an unplanned void in the leadership chain might be perceived as a threat to shareholder value. Shareholders, too, wanted assurances that maximizing a firm’s performance was not tied to one or two invaluable people.

Compounding the concern was the realization that the workforce was aging at all levels, and that retirements were a certainty. Prior to the Crash of 2008, employer’s concern over this was amplified by anecdotal reports from other employers already experiencing the impact. A movement toward a remedy began to take shape, and not just for high-ranking salary positions, but technically critical salary positions and even hourly positions that with a loss of one or a few technical experts might disrupt operations and impair a firm’s viability.

For decades prior to the Crash of 2008, Proactive Technologies, Inc. worked with a lot of employers by job/task analyzing their critical job classifications – initially hourly positions but a growing salary class of positions as well. This approach “captured the expertise” of the aging workers to use it to develop the tools which would allow the company to train nearly anyone with a sufficient core skill base, replicating experts as needed.

click here to expand

Then the Crash of 2008 happened and employers found themselves unexpectedly and unwillingly accelerating the loss of technical experts at all levels. For employers late to the game, there was no longer time to capture expertise; it had already left the building. We saw this phenomenon repeating itself with the Covid-19 pandemic. Read More


Tips for Workforce Developers – Partnerships That Matter…and Last

by Dr. Dave Just, formally Dean of Corporate and Continuing Education at Community Colleges in MA, OH, PA, SC. Currently President of K&D Consulting 

Having partnered with Proactive Technologies, Inc. on workforce development projects for the past 20 years, it gave me a chance to innovate and learn what works, what efforts are most appreciated by the employer, trainee and employee, and which projects utilized resources most efficiently and effectively. There are numerous resources available from many sources that can impact a trainee with varying effectiveness, but the secret is selecting those that are appropriate for the project outcome the employer expects.

As Dean of Corporate and Continuing Education at community and technical colleges in Massachusetts, Ohio, Pennsylvania and South Carolina, at the start of each assignment I had to first learn what resources our school had available for the sectors we were targeting, and how current and relevant the courses, materials and instructors were for the specific skills employers were seeking. To be honest, in some areas our products and services were weaker than expected, so the determination needed to be made whether we had the resources and will to upgrade what we had or develop what we needed. We also had to consider if it would be more economical to strategically partner with outside providers who always had the current technical expertise and already created solutions we could incorporate into our offerings.

click here to expand

Too often there was internal resistance and a lack of understanding of how important being relevant was to workforce development. Many institutions grew complacent to change or were discouraged by shrinking budgets or misaligned priorities from innovation. Always feeling a sense of urgency to overcome the ubiquitous “skills gap” that cast a shadow on all education and workforce development efforts, there are some important steps that I developed for myself to help me better assess each employer’s need and provide solutions client employers appreciated. This is the reason most employers we worked with kept us engaged year after year. We earned, and maintained, their respect and gave them confidence in our solutions, which ensured our continued role in their business model. This provided a continued revenue stream for the school to continue, improve and expand those efforts. Read More


Apprenticeships That Make Money? Not as Impossible as it Seems (Part 2 of 2) – Setting Up an Apprenticeship Center

by Dean Prigelmeier, President of Proactive Technologies, Inc.

In the first part of a two-part article entitled “Apprenticeships That Make Money? Not as Impossible as it Seems (part 1 of 2)” appearing in the Proactive Technologies Report, I discussed what seemed to be the obvious differences in European and U.S. apprenticeship models. I suggested that visionary U.S. business leaders consider creating a revenue-generating “apprenticeship center” within the organization to cover the costs of the apprenticeship and, in some cases, make money. How could that be accomplished? In continuing the discussion I would like to offer a possible strategy.

American manufacturers turned to lower wage labor sources, such as Mexico, China and India, during the last 30 years to lower their production costs in the hope that they would be more profitable. It is now understood that with lower wage costs comes additional supply chain costs which can, if uncontrollable, erase some or all of the gains a lower wage level might offer.

But what if some of the services or operations to manufacture products or sub-assemblies that were, or are to be, off-shored could be done internally – at the labor cost of “training wages” as done in Europe – using equipment that would otherwise have to be idled, sold or shipped? What if those training wages could be furthered reduced by state grants? Could employers find that the source of lower wages is in their own back yard?

Although the following approach for determining if an apprenticeship center/cost-reduction center is right for your organization is simple, it should be scalable to any organization with slight modifications: Read More


Read the full April, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – March, 2024

Economic Development Opportunities – An Important Incentive in Attracting Companies to Your Region

by Dean Prigelmeier, President of Proactive Technologies, Inc.

When organizations try to create new jobs in their area – working with companies that are considering moving to, expanding to or expanding within their areas – skilled labor availability for many regional economic development strategies may include an offering that consists of one part skills assessment, one part general skill classes and a sprinkling of worker tax credits or grants. That seems to be what most incentive packages include, but is that because: A) that is what the other offers look like; b) it has been like that for decades; C) it is assumed that is all that is available; or D) all of the above?

For over forty years headlines sounded the alarm that those institutions that were training the workforce of tomorrow were not succeeding in their effort as discussed in, “An Anniversary That You Won’t Want to Celebrate: Years Later and The Skill Gap Grows – Is it Finally Time to Rethink The Nation’s Approach?“). Many skilled workers that are available to work do not have the skills that employers need today. Not completely satisfied with their answer to the inevitable question regarding the region’s skilled labor availability and how workers with specific skill needs will be found or developed, some economic development organizations are exploring other options and opportunities.

“Whether attracting new companies and helping them thrive and expand, or helping existing business to do the same, this approach is an important component of any economic development strategy.”

click here to expand

It is important to understand that the types of skills that employers are most concerned with – especially employer-specific task-based skills – most likely have not been in the local workforce, nor have any programs been available in local institutions to develop them, simply because these new jobs, with new skill requirements, have never been in the area. The types of skills needed for most modern manufacturing and advanced manufacturing have never been developed because the need was not present nor the data on these jobs available. Even if the need was present, by the time the skill is recognized, a program developed and a worker completed the learning, manufacturers either moved on or moved out. Read More


Assessing Employees With Past Drug Addictions for Work Tricky

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

A prevalent challenge faced by many employers is what to do with job applicants with a record of past drug use. Current drug use detected during screening is more cut and dry, but candidates that are going through, or went through, treatment and have maintained a clean life-style since need more care to avoid running afoul of the Americans with Disabilities Act of 1990.

The Americans with Disabilities Act protects employees and job applicants from discrimination based on past drug addiction in most cases. In a article for the Society for Human Resource Management (SHRM) website by Roy Maurer, “The Americans with Disabilities Act (ADA) protects employees and job applicants from discrimination based on past drug addiction. These individuals qualify as having a disability if they successfully completed a supervised drug rehabilitation program or are currently participating in such a program and are no longer using prohibited drugs.”

One expert he interviewed, Rayford Irvin, the Houston district director for the Equal Employment Opportunity Commission (EEOC), said “Opioid addiction is a disability that is affecting millions across the United States, yet many are regaining control over their lives by participating in supervised rehabilitation programs.” “When a worker has a record of such a disability and is performing his job proficiently, an employer cannot lawfully preclude the worker from employment because he is receiving treatment for his addiction.” Read More


Worker Development Is an Ongoing Commitment, Not a “One and Done” Event

by Frank Gibson, Workforce Development Advisor, retired from The Ohio State University – Alber Enterprise Center

I have spent many years of my life working in manufacturing and providing consulting services to manufacturers and workforce development groups. While employers like to showcase there ISO, IATF or AS certification symbolizing their commitment to quality, imbedded throughout those certification program requirements are the need to demonstrate a system to develop workers, to maintain records that workers are trained to the company’s processes, show the continuous improvement of the training programs and updating of workers, and the protection of “legacy knowledge” and “tribal wisdom” to ensure sustainability.

Unfortunately, one common thread I find is the employer’s weak focus and commitment to the development of workers. Sure, some employers rise above the rest and there are a lot of core skill and industry-general training programs hosted by community colleges and technical training providers (some seem to make the effort to be relevant with changes in technology and the trajectory of industry). However, too often management rarely stays focused on worker development as they do on other parts of the organization. I don’t often see a “commitment to quality” and “continuous improvement” principles being applied to what the organizations fondly call “training.”

Typically, the conversation changes to classes that are offered before the realization that accounting will see it as a “cost” and veto the idea before it gets off the ground. Or, the manager hands it off to someone…knowing it will probably see the same fate. Even though most states have grant funds available to help employers pay the cost of classes provided locally and specialty training provided elsewhere, states are willing to provide funding to offset most, if not all, of the employer’s investment to implement a true, documented structured on-the-job training program, as well.

Worker training – the “transfer of expertise” – goes on every day, with every worker in every organization. How many companies would you say harness the existence of this phenomenon that grew out of the non-existence of anything formal to “make the best of it?” Informal, unstructured and undocumented on-the-job training (“OJT”) is rampant; the employer’s support and commitment usually isn’t. Worker development seems to be the last thing on the minds of management when things are going well but the first thing to be cut during turbulent times; be it cutting training budgets, severely limiting time devoted to informal OJT, or inadvertently laying off individuals who served as ad hoc, informal OJT trainers because someone had to do it. Read More


Proactive Technologies’ Turnkey Package Offers for Prospective and Returning Clients – Discount Window Now Open, Closing Soon!

Proactive Technologies, Inc. – Staff

The world has been through a lot in the last few decades. Employers finding themselves making decisions and changing their mind for the most unexpected reasons. Proactive Technologies, Inc.® wants to accommodate and support those workforce development decisions in the best way it knows how. This introduction for new and returning clients of its turnkey worker development package is one example. The current discount window is open from January 1st – March 15, 2024!

Value comes in many forms. Sometimes value stares us in the face but we may not realize it…or fully realize it. Like a software we purchase but only use 10% of its functions, a car that we seldom drive, or the treadmill that sits in its original packaging. Underutilized value not only represents a minimal return on an investment, it is a lost opportunity to maximize its potential and an inefficient use of capital.

Undeveloped or under-developed worker capacity is a lost opportunity to increase return on worker investment and reduce labor costs. Multiply this experience by the number of employees you have and the loss can be substantial! This is a fact that should be obvious and continually frustrates many a CEO or Operations Manager. It doesn’t have to be that way. Read More


Apprenticeships That Make Money? Not As Impossible as it Seems-Part 1 of 2

by Dean Prigelmeier, President of Proactive Technologies, Inc.

Part 1 of 2: The European Difference

I had dinner with a friend of many years, Günther Hauser, in his hometown of Neckarsulm Germany. I met Günther several years ago when Proactive Technologies, Inc. (“PTI”) was working on a project in South Carolina that required PTI staff to travel to the LÄPPLE manufacturing plant in Heilbronn, Germany where Günther was the manager of the apprenticeship program. During that dinner, our conversation naturally drifted to an area of shared interest; worker training and apprenticeships and the differences in the United States and European systems of workforce development.

LÄPPLE is a worldwide supplier of press parts, autobody shell components, standard parts and rotary tables as well as automation solutions. They employ over 2000 people and provide exclusive, sophisticated solutions in forming and car body technology as well as the engineering and design of automation systems, machines and tools. Some of their customers include many of the automobile manufacturing companies such as Audi, BMW and Volkswagen.

While working on the Heilbronn project, PTI staff performed job/task analysis on several job classifications that were being duplicated at a new joint venture in Union, South Carolina including Press Operator, Press Technician, Maintenance, Quality Control, Assembly Operator and Assembly Technician. Günther was kind enough to take me on a tour of the apprenticeship center at the plant. The center had around 100 apprentices at any one time at various stages of progression. Modeled after the manufacturing plant where it was established, the group of young workers were processing in each of their disciplines of choice; CAD-CAM Engineering, Tool & Die, Quality Control, Machining. It was like a mini-manufacturing facility with the LÄPPLE factory. Read More


Read the full March, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – February, 2024

Even the Best Written Work Instruction Is No Replacement for Structured On-the-Job Training

by Dean Prigelmeier, President of Proactive Technologies, Inc.

If you’ve ever had the opportunity to assemble a toy or piece of furniture by the included instructions, you’ll appreciate the assessment that many of these instructions seem to be an afterthought, lacking clarity and often causing more confusion than one would think for something considered to be an “assembly instruction.”

You might be aware that many companies create work instructions in a rush attempt to qualify for ISO, IATF or AS certification. Often someone with little or no experience as a technical writer is asked to write a work instruction for others to follow. Sometimes several people, with many backgrounds, are tasked in an effort to quickly prepare the organization for a pre-certification audit. The belief is that the auditor only wants to make sure that the company has work instructions, not critique the quality of the instructions. Often, as well, little thought is given to keeping the documents current and accurate as changes and improvements occur. Soon, any document clarity is reduced to confusion.

click here to expand

The original intent might have been a document that was a clear, step-by-step guide to performing a task but, written in the style of the untrained writer, one clear step could have turned out to be one convoluted paragraph, forcing the reader to read, interpret, understand, and follow while having their hands full.

Lacking experience, a writer will sometimes leave out some of the important aspects of task performance – the things they needed to know when they first learned the task. For each person being trained to compliance with the document, each interpretation is revealed in performance. As time goes by, and these individuals become future trainers, these misinterpretations might be institutionalized in performance, and not be detected until major quality, safety or audit issues arise. Read More


Lessen Gen Z Workplace Anxiety – Make Training Deliberate and Engaging

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

In an article in Business Insider entitled, “Gen Z is bringing a whole new vibe to the workplace: anxiety,” author Eve Upton-Clark tried to shed some light on a contemporary topic considered enigmatic by some and over-blown by others; Generation Z and its journey into the workplace. Understanding generational shifts in behaviors and expectations are a never-ending role of employers and their management. Having a better insight can make the experience a little less challenging for everyone.

In her article she writes, “Anxiety is driven by uncertainty,” Ellen Hendriksen, a clinical psychologist and the author of “How to Be Yourself: Quiet Your Inner Critic and Rise Above Social Anxiety,” said. Because they grew up in the digital age with nearly unlimited amounts of information at their fingertips, Hendriksen said, Gen Z has the least experience with uncertainty. “When you need to know where to go, you can pull up Google Maps,” she said. “If you are going to a new restaurant, you can look at the menu ahead of time. There’s a lot of certainty in this world now which didn’t exist before.”

She continues, “But at work, there’s often a lack of certainty — which gets exacerbated in a remote workplace where it is easy to avoid confrontation. “Anxiety is maintained by avoidance,” Henriksen said. “Our first reaction when we are anxious is often to avoid the thing that is making us scared, and so if we are anxious about speaking in a meeting, we might remain silent. If we are anxious about taking phone calls, we’ll let those calls go to voicemail.” Further, “Whether sensing when a presentation has gone on too long or understanding the subtext of what someone is saying, managing how you work is a fundamental skill.”

Whether a Gen Z or Baby Boomer, how we are trained once hired is a crap shoot. Read More


Proactive Technologies’ Turnkey Package Offers for Prospective and Returning Clients – Discount Window Now Open

by Proactive Technologies, Inc. – Staff

The world has been through a lot in the last few decades. Employers finding themselves making decisions and changing their mind for the most unexpected reasons. Proactive Technologies, Inc.® wants to accommodate and support those workforce development decisions in the best way it knows how. This introduction for new and returning clients of its turnkey worker development package is one example. The current discount window is open from January 1st – March 15, 2024! 

Value comes in many forms. Sometimes value stares us in the face but we may not realize it…or fully realize it. Like a software we purchase but only use 10% of its functions, a car that we seldom drive, or the treadmill that sits in its original packaging. Underutilized value not only represents a minimal return on an investment, it is a lost opportunity to maximize its potential and an inefficient use of capital.

Undeveloped or under-developed worker capacity is a lost opportunity to increase return on worker investment and reduce labor costs. Multiply this experience by the number of employees you have and the loss can be substantial! This is a fact that should be obvious and continually frustrates many a CEO or Operations Manager. It doesn’t have to be that way.

Every employer conducts a massive amount of informal, unstructured and undocumented on-the-job, task-based training every year. The significant cost(especially if you have a lot of retiring experts, revolving new-hires and marginally trained residents), as well as the effectiveness, usually goes unmeasured. If you doubt this point, ask yourself one question; Do I know which tasks each of my employees have mastered, and which they have not? If you draw a blank, you are not alone. Read More


Deming Was Right on Training Workers

By Dean Prigelmeier, President of Proactive Technologies, Inc.

Dr. W. Edwards Deming, an American engineer, statistician, professor, author, lecturer, and management consultant, remembered for his vital role in rebuilding the Japanese manufacturing sector after being destroyed during WWII, said “You have one chance to train a worker, just one, so don’t muck it up.” At the time, his theories on management and manufacturing, quality and business longevity, were dismissed by U.S. manufacturers. After quickly helping move Japan’s manufacturing and economy towards competitive status in a relatively short time, U.S. manufacturers reevaluated his theories and practices and began implementing the parts of them that did not significantly affect short-term profitability.

It is not clear if, by the statement, he had the U.S. vocational education and classroom-based training system in mind, or the informal, haphazard and undocumented one-on-one training a worker receives once hired. Either way, one thing in common was that the accelerating rate of technological advancement – post-WWII to 1980 and beyond (computers entered the scene) -forced continuous revision of the learning and training requirements for employment. Literally, technology was changing the nature of work before their eyes leaving manufacturers flat-footed on what to do and education, already technically lagging the current nature of work, in a perpetual and losing state of “catch-up.”

To set the record straight, this is not a criticism of education itself. But the way education institutions are structured, they literally cannot keep up with academic-led innovation let alone employer-led technological innovation. For example:

click here to expand
  • innovation occurs
  • someone writes and publishes a book (2-4 years)
  • an instructor adopts the book and presents it with their curriculum to the review committee (1-3 years)
  • a student attends a course that includes the new technology, completes the degree program (2-4 years)
  • former student searches for job where skills are relevant (1-3 years)
  • former student lands job and can utilize skills (1-2 years)

If all goes well, a student trained to be worker with skills relevant to that technological advancement contributes to the momentum…7-16 years after the innovation was introduced. By then several new advancements were probably either building on the initial advancement or making the initial advancement obsolete.  Read More


Read the full February, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Proactive Technologies Report – January, 2024

From Innovation to Implementation – Success Depends on Preparedness of Those Executing

by Dean Prigelmeier, President of Proactive Technologies, Inc.

How often does a product or service go straight from research and development to service implementation or product production? A skilled, experienced worker may be able to overcome the ambiguity of this hand-off, but it seems there is, today, a shortage of skilled, experienced workers; baby boomers finally decided they can, or have to, retire, or some companies experience high turnover rates of replacements, or most employers say they lack of skilled candidates…or even someone skilled enough to train them.

There are many reasons that this loosely organized hand-off still exists:

click here to expand
  • Perhaps from a sense of futility, with engineers seeming to have given up on the notion of training workers first to ensure immediate output quantity, quality and consistency;
  • Perhaps it is from knowing that the organization lacks a “system” in place to facilitate the transfer;
  • Perhaps it is from the belief that, especially in the early stages, the product or service may go through many changes before a coherent, repeatable process settles in and when it does the next product or service has been introduced;
  • Perhaps from a sense of superiority, that “I know how to do this [because I designed it] so everyone else should know what to do.”

For those who recognize the need for worker training and try to incorporate it manually while trying to keep up with engineering and technological innovations, it is common to find a training program released well into the last days of the life cycle – just in time to train workers for the things they made and serviced years before. Manual methods just do not keep up anymore, and they haven’t for the last 30 years. This doesn’t mean we should “leap-frog” to Artificial Intelligence or online training. The cost alone would dissuade anyone from utilizing it for this type of task-specific training, never mind the inappropriateness.

The most efficient and effective path to expediting a process from development of the process (including all pertinent aspects) to implementation is displayed below. The task should be the central focus, with each stakeholder department contributing its input and metrics of accurate performance. Simply stated, the engineer can draft a process, then the other departments can add their components in order. Once all inputs are in, everyone can review and make changes based on each other’s observations and comments before a final document is released. Read More


Retiring Workers and the Tragic Loss of Intellectual Property and Value

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

The warnings went out over three decades ago. Baby Boomers were soon to retire, taking their accumulated expertise – locked in their brains – with them. But very little was done to address this problem. Call it complacency, lack of awareness of the emerging problem, preoccupation with quarterly performance, disinterest or disbelief, very few companies took action and the Crash of 2008 disrupted any meager efforts that were underway.

Over a decade ago, Steve Minter in an IndustryWeek Magazine article on April 10, 2012 stated, “Only 17% of organizations said they had developed processes to capture institutional memory/organizational knowledge from employees close to retirement.” Who is going to train their replacements once they are gone? Would the learning curve of replacement workers be as long and costly, repeating the same learning mistakes, as the retiree’s learning curve? Would operations be disrupted and, if so, to what level?


“In our new “outsourcing nation,” a widely held belief is that employees are simply costs to be cut and not assets to be valued.” …. “Manufacturing faces a two-sided problem: it not only has thousands of people retiring, but it does not have the training programs to train skilled workers to replace them.”

A Strategy to Capture Tribal Knowledge, IndustryWeek- Michael Collins 5-23-16


click here to expand

In the last few years, it seems an alternative to the concentration of expertise in a few subject matter experts has become to use lower-wage temporary or contract workers who specialize in smaller quantities of processes, and who can be “traded-out” with a minimum amount of disruption. History will tell us just how costly that approach was and if anything was learned. Read More


Proactive Technologies’ Turnkey Package Offers for Prospective and Returning Clients – Discount Window Now Open!

Proactive Technologies, Inc. – Staff

The world has been through a lot in the last few decades. Employers finding themselves making decisions and changing their mind for the most unexpected reasons. Proactive Technologies, Inc.® wants to accommodate and support those workforce development decisions in the best way it knows how. This introduction for new and returning clients of its turnkey worker development package is one example.

Value comes in many forms. Sometimes value stares us in the face but we may not realize it…or fully realize it. Like a software we purchase but only use 10% of its functions, a car that we seldom drive, or the treadmill that sits in its original packaging. Underutilized value not only represents a minimal return on an investment, it is a lost opportunity to maximize its potential and an inefficient use of capital.

Undeveloped or under-developed worker capacity is a lost opportunity to increase return on worker investment and reduce labor costs. Multiply this experience by the number of employees you have and the loss can be substantial! This is a fact that should be obvious and continually frustrates many a CEO or Operations Manager. It doesn’t have to be that way.

click here to expand

Every employer conducts a massive amount of informal, unstructured and undocumented on-the-job, task-based training every year. The significant cost of inefficiency (especially if you have a lot of retiring experts, revolving new-hires and marginally trained residents), as well as the effectiveness, usually goes unmeasured. If you doubt this point, ask yourself one question; Do I know which tasks each of my employees have mastered, and which they have not? If you draw a blank, you are not alone. Read More


Quality Policies and Process Sheets Do Not Replace Training

by Dean Prigelmeier, President of Proactive Technologies, Inc.

A very common fallacy in business operations is that a description of what should be done listed in a quality policy, such as a quality control policy or a quality assurance plan, that seems to be sufficient for the training component of ISO/IATF/AS certification meets, therefore, the company’s training requirement in general. Perhaps this false equivalency is wrongly supported by the additional fallacy that the existence of standard work instructions is the equivalent of on-the-job training plans. Too often this is used to defend the belief that this replaces formal task-based training.

Sometimes this leads to the rationalization that if the company keeps it simple and barely meets what an ISO/IATF/AS auditor might accept for their certification purposes, the training requirement is covered. But an auditor at that stage is just looking at what the company is intending to do, not how they carry it out. That is discovered later.

This false assumption is challenged when product or services turn up defective, and customers expect an explanation and a corrective action. This is when a weak, or no, connection can be drawn between the policy that guides quality standards, work processes and who trained and certified the employee to perform the task independently is discovered. This is when the records that exist, if any, do not support the assumption that mastery of the task ever occurred. This is when the customer loses faith in the producer or supplier – not just in the task(s) isolated in the one incident, but possibly performance of all tasks on which they depend.

click here to expand

From a learning perspective, manufacturing environments present hurdle after hurdle to learning and mastering the work to be performed. Unrelenting production schedules, technology advancements and continuous improvement efforts – all offer little room for deliberate task-based training while changing the task out from under the worker while they are trying to learn and master it.

It is in the employer’s and employee’s interest that the job, and all of its required tasks, are mastered as quickly and completely as possible. But the spoils go to those employees who possess the core skills and necessary abilities to assimilate what they see around them and successfully self-teach themselves. Unfortunately, employers find those people hard to find as technology renders previous skill requirements moot (only the employer has those ever-changing, task-based skill requirements) and are reluctant to pay the experts they have accordingly to keep them. Read More


Read the full January, 2024 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Upcoming Live Online Presentations

< 2020 >
February 23
  • 23
    No events

Sign up!