Proactive Technologies Report – July, 2022

Is It Possible to Improve Worker Performance Without Documented Task Mastery?

by Dean Prigelmeier, President of Proactive Technologies, Inc.

W. Edwards Deming said, “We are being ruined by the best efforts of people who are doing the wrong thing.” The inefficiencies, discrepancies, affects on morale and potential for adverse incidents would seem to make preventing this a priority. To make improvements given this condition seems to be, at most times, futile.

Often we are lulled into believing this phenomena doesn’t exist when products get produced and shipped, and services are provided. That is where the metrics are pointed – output. But how much is known about the effort, sometime struggle, to get there? Was the effort efficient, accurate and consistent? If we do not have definitive answers to these questions, how to improve performance will likely be as illusive and resources used in the attempt a waste.

click here to expand

For many organizations, the only way to know the road was bumpy is through negative events; product scrap or rework, lost customers, operator injury or an outcome requiring legal intervention. Perhaps the oversight has been lacking due to a lean or “green” supervisory staff, or a lack of budget for the extra hours or equipment needed to monitor the process, or processes are unsettled and changing rapidly without those individuals performing them being immediately notified.

For any reason, relying on a negative event to prompt scrutiny can be very costly – much more than the investment needed to prevent this. Worse yet, an investigation too narrowly focused resulting in remedies that overlook the obvious reasons for the discrepancy may inject new uncontrolled variables. Many remedies become more disciplinary (e.g. reprimanding or firing the person(s) thought responsible, a complete audit involving all departments and staff, reassigning the process to another department, or delegating the process to one person who knows how to get around the systemic errors and barriers to produce the output expected…until that one person moves to another job or company and that “wisdom” is lost).

To determine to what degree this is an issue with your operation, you need only: Read More


Cross-Training Workers After Lean Efforts Builds Capacity Using Existing Staff

by Stacey Lett, Director of Operations – Eastern U.S. – Proactive Technologies, Inc.

Lean activities to redesign processes for better efficiency in a department, or between departments, sometimes result in “surplus” workers – partially or in whole units. It is the subjective priority of Lean practitioners since it is a tangible illustration of a successful Lean improvement. Processes that previously needed 3 people to complete may now only need two, if the efficiency were discovered. So what happens to that one person that has valuable acquired expertise, representing a significant investment by the employer? Would the wise outcome of Lean efforts be to just cut that person from the lineup?

The short answer is most likely not. Any efficiency and cost savings brought about by the Lean redesign would be offset by the loss of the expertise for which the investment has already been made. Most likely the reason for the Lean was not in reaction to no return on worker investment, but rather a desire to increase the return on worker investment.

click here to expand

If the worker is reassigned to another department, and no task-based training infrastructure is in place, that reassignment may lower the efficiency there which, again, reduces the gains made by the Lean effort. So part of the Lean effort must be the deliberate cross-training of workers in temporary assignments or longer-term reassignments to other departments that seem to have the need for increased staffing, perhaps as a result of the increased throughput achieved from the Lean effort in the upstream department in the chain.

Another outcome of a lean effort may not include moving personnel, but either equipment or processes out of the Leaned department into another department up or downstream, often without structured training to absorb the new activities and maintain efficiency. Here the loss of gains made are similar if no training on how to perform the processes or run the equipment is provided. Read More


Explaining Your Process Training to Auditors, Prospects and Clients

by Proactive Technologies, Inc. Staff

How much time, energy and resources are expended by your firm when someone comes to visit and wants to “kick the company’s tires?” When it comes to training your workers to internal and/or company processes, a structured on-the-job training program that operates smoothly and completely in the background may have the answers your clients are looking for.

For most organizations, the general notion is that training is going on in every corner of the organization, for every worker at any time of the day or night. One person is showing another person how to perform a process, operate a piece of equipment or software, fill out a form or, yes, make a copy using the new copy machine just installed. How effective is that informal form of training? Have you ever walked by a copy machine and seen someone standing in front of it, staring at the control panel…then the sky, as if seeking divine intervention.

click here to expand

When the resident expert masters a task and it becomes routine, there is a tendency for them to marginalize the task as so easy that the next trainee should learn it by osmosis. If not, maybe the new-hire “just doesn’t seem to want to learn.” Somehow, the organization may get by. In this case, like so many, it may sound like an insignificant example of training, but not to the person who needs the copy and who may be judged if a meeting is waiting for it.

Same, too, are the more critical and complex tasks of the job, requiring compliance with so many factors such as engineering specifications, quality control requirements, safety requirements and company policies. Without a deliberate task-based training infrastructure in place, training might be ad hoc, informal, unstructured and rarely documented. Add to this the periodic worker cross-training that allows workers to train in, and master, tasks in multiple job areas and the amount of critical, but undocumented, training can be tremendous.

In the event of an audit by an internal department, a certifying agency, a client or a prospective client, explaining how a worker is trained to master a task critical to a repeated high level of quality might be difficult to impossible. And answering how a worker, who is thought to have mastered a task, is updated when the process is improved, redesigned, affected by changes in technology, changeover of product line or part of an orchestrated improvement program might be even more difficult. Read More


Maximizing Worker Capacity Maximizes Shareholder Value…If Done Right

by Dean Prigelmeier, President of Proactive Technologies, Inc.

To many, “maximizing shareholder value” has become synonymous with layoffs and short-term cuts that will typically have harmful effects on long-term operational capacity. An often overlooked, but more productive, goal is “maximizing worker capacity” and should be a priority for every organization – publicly traded or not. Leaders of an organization are quick to say, “our workers are our greatest asset.” Yet, efforts to maximize returns on this asset are often hard to recognize or understand.

Maximizing a worker’s capacity maximizes worker value. Collectively, maximizing each worker’s capacity maximizes an organization’s value, and that of the shareholders. It is as simple as that.

click here to expand

Publicly traded companies, and even some privately held companies getting ready to go public, seem preoccupied with increasing quarterly earnings per share above all else. A consistently high level of earnings per share over the long-run no longer seems adequate for some. If the market is slack, an organization might carve costs out of the company from even a lean operation rather than disappoint investors. When labor is viewed as a “cost” rather than an asset, the temptation might be to cut benefits and wages. This may prop-up numbers for the short-term, but a demoralized workforce might not produce the same levels of output and quality yield as before. Sadly, a decision might be made in following quarters to cut benefits and wages even more, followed by workers if needed to make the magic number. All the while, worker and operational capacity, along with enthusiasm and loyalty, are eroding.

How does this erosion happen? When workers are cut, the work they used to perform gets transferred to the remaining workers. If there isn’t a mechanism to quickly “transfer expertise” to the worker expected to take on the new responsibilities, capacity drops until the trainee comes up to speed. For as long as the transfer takes, one well-paid subject matter expert trainer is being paid to train the paid trainee, yet productivity improvement may be negligible. And further complicating the process, perhaps no one thought about capturing the exiting workers expertise before they left the building, so some “reinventing the wheel has to occur.” Multiply this across all affected workers and the labor and opportunity costs may wipe out any anticipated gains by cutting worker payroll.

Proactive Technologies Report has presented many articles about the value of workers, how structured on-the-job training increases the worker’s capacity to perform more tasks to a level of mastery, the high cost of worker turnover, and more. It is a concept we feel strongly about. Yet we are continually surprised how this topic is avoided by company’s accounting departments and upper management when they feel inclined to trim costs here and there, avoiding cultivating the enormous wealth before them – waiting to be harvested. What would be the value of just a 10% increase in worker capacity, operational capacity, quality and quantity of work, and worker compliance (safety, ISO/IATF/AS, etc.) to any operation?

Not to diminish the important role of investors, but there has been a lot written about whether maximizing shareholder value is a destructive rule that needs to be changed. Critic Steve Denning wrote in an article in Forbes published in 2011 entitled “The Dumbest Idea In The World: Maximizing Shareholder Value,” “Imagine an NFL coach,” writes Roger Martin, Dean of the Rotman School of Management at the University of Toronto, in his important new book, Fixing the Game-What Capitalism Can Learn from the NFL, “holding a press conference on Wednesday to announce that he predicts a win by 9 points on Sunday, and that bettors should recognize that the current spread of 6 points is too low. Read More


Read the full July, 2022 Proactive Technologies Report newsletter, including linked industry articles and online presentation schedules.

Posted in News

Upcoming Live Online Presentations

< 2024 >
November
MoTuWeThFrSaSu
    123
45678910
1112
  • 7:00 am-7:45 am
    2024-11-12

    Click Here to Schedule

    (Mountain Time) The philosophy behind, and development/implementation of, structured on-the-job training; the many benefits the employer can realize from the PROTECH© system of managed human resource development in more than just the training area; examples of projects across all industries, including manufacturing and manufacturing support companies. Program supports ISO/AS/IATF compliance requirements for “knowledge(expertise)” capture, and process-based training and record keeping. When combined with related technical instruction, this approach has been easily registered as an apprenticeship-focusing the structured on-the-job training on exactly what are the required tasks of the job. Registered or not, this approach is the most effective way to train workers to full capacity in the shortest amount of time –cutting internal costs of training while increasing worker capacity, productivity, work quality and quantity, and compliance.  Approx 45 minutes.

  • 1:00 pm-1:45 pm
    2024-11-12

    Click Here to Schedule

    (Mountain Time) The philosophy behind, and development/implementation of, structured on-the-job training; how any employer can benefit from the PROTECH© system of managed human resource development in more that just the training area; building related technical instruction/structured on-the-job training partnerships for employers across all industries one-by-one. How this can become a cost-effective, cost-efficient and highly credible workforce development strategy – easy scale up by just plugging each new employer into the system. When partnering with economic development agencies, and public and private career and technical colleges and universities for the related technical instruction, this provides the most productive use of available grant funds and gives employers-employees/trainees and the project partners the biggest win for all. This model provides the support sorely needed by employers who want to partner in the development of the workforce but too often feel the efforts will not improve the workforce they need. Approx. 45 minutes

1314
  • 7:00 am-7:45 am
    2024-11-14

    Click Here to Schedule

    (Mountain Time) The philosophy behind, and development/implementation of, structured on-the-job training; how any employer can benefit from the PROTECH© system of managed human resource development in more than just the training area; building related technical instruction/structured on-the-job training partnerships for employers in across all industries. When partnering with economic development agencies, public and private career and technical colleges and universities, this provides the most productive use of available grant funds and gives employers-employees/trainees and the project partners the biggest win for all. Program supports ISO/AS/IATF compliance requirements for “knowledge(expertise)” capture, and process-based training and record keeping. This model provides the lacking support needed to employers who want to easily and cost-effectively host an apprenticeship.  Approx 45 minutes.

  • 9:00 am-9:45 am
    2024-11-14

    Click Here to Schedule

    (Mountain Time) This briefing explains the philosophy behind, and development/implementation of, structured on-the-job training; how any employer can benefit from the PROTECH© system of human resource development in more than just the training area. This model provides the lacking support employers, who want to be able to easily and cost-effectively create the workers they require right now, need. Program supports ISO/AS/IATF compliance requirements for “knowledge(expertise)” capture, and process-based training and record keeping.  Approx 45 minutes.

  • 1:00 pm-1:45 pm
    2024-11-14

    Click Here to Schedule

    (Mountain Time) The philosophy behind, and development/implementation of, structured on-the-job training; how any employer can benefit from the PROTECH© system of managed human resource development in more than just the training area; building related technical instruction/structured on-the-job training partnerships for employers across all industries and how it can become an cost-effective, cost-efficient and highly credible apprenticeship. Program supports ISO/AS/IATF compliance requirements for “knowledge(expertise)” capture, and process-based training and record keeping. When partnering with economic development agencies, public and private career and technical colleges and universities, this provides the most productive use of available grant funds and gives employers-employees/trainees and the project partners the biggest win for all. This model provides the lacking support needed to employers who want to easily and cost-effectively host an apprenticeship.  Approx. 45 minutes

151617
18192021222324
252627282930 

Sign up!